11 Installing the RP200 Display (Method 1)
11.1
Removing the Camera Spacer
Remove the rear cable cover.
1
3
Remove the camera spacer.
Phillips
screwdriver
Camera spacer
11.2
Installing the Display
Prepare two displays, dual-screen bracket, cables, connecting plates, and necessary screws for
installing the dual-screen bracket and connecting plates as specified in the RP
1
Sort the cables.
1. Connect one end of the display power cable to the 7-
outlet PDU in the rack.
2. Route the other ends of the power cable and video
cable of the display out of the middle part of the
upper front panel.
2
Take out the M6 Allen wrench from the bracket package.
2
Remove the crimping cover.
NOTE
Keep the camera spacer in a safe place for
future use during the TE30/VPC600/VPT300
installation.
28
packing
list.
M6 Allen wrench