Huawei RP200 Room Presence Installation Manual page 36

11 Installing the RP200 Display (Method 1)
11.2 Installing the Display
(For Samsung-LH48DCE and Samsung-LH55DCE only) Install four male/female studs
8-1
7
respectively on the top and at the bottom of the joints between the two displays.
Eight male/female studs required for connecting two
Samsung-LH48DCE or Samsung-LH55DCE displays
Install the male/female
studs onto the holes.
Install the male/female studs at the joints of the
8-2
displays.
- Install six male/female studs for LG-47LS33A/LG-
49SE3KB/TCL/LG55SE3D.
- Install eight male/female studs for LG-55LS33A/LG-
55SE3KB.
Install the male/female
studs onto the holes.
Use a pair of needle-nose pliers
to tighten the male/female studs.
Use a pair of needle-nose
pliers to tighten the
male/female studs.
32
3
Install one male/female stud
respectively.
Take out the connecting plates
9
from the dual-screen bracket
package.
LG-47LS33A
LG-49SE3KB
LG-55LS33A
LG-55SE3KB
LH48DCE
LH55DCE
TCL
LG-55SE3D