13 Installing the TE30/VPC600
CAUTION
All cables connected to the TE30 or VPC600 must be sorted into the groove of the cable trough on the
camera spacer. The outer edge of the TE30 or VPC600 must be level with the surface of the display.
2
Install the TE30 onto the rack.
Connect the TE30 integrated cable to the TE30 proprietary port. (For the VPC600,
3
connect the V01 cable to its proprietary port.)
Mount the TE30 on the top of
the display based on the
screw hole.
Bottle gourd-shaped mounting peg
Adjust the position of the TE30.
Tighten the screws to secure
the TE30.
48