Huawei RP200 Room Presence Installation Manual page 43

11 Installing the RP200 Display (Method 1)
11.2 Installing the Display
DANGER
The display requires at least two people to lift or move it. Exercise caution when lifting or moving it. Use
one hand to hold the horizontal bars of the bracket and the other to hold the bottom of the display. To
prevent the connecting plates from being distorted, lift the two displays up after putting them upright.
21
Install the displays onto the rack.
NOTE
For Samsung-LH48DCE/Samsung-LH55DCE display,
connect cables before installing it onto the rack.
Insert four mounting screws into the holes on the rack.
Installing
holes
Sort the cables. Affix the cables to the bracket
23
using ties.
Mounting
screws
39
22
Connect necessary cables for
the displays.
1. (For 47LS33A and 55LS33A only)
Connect the audio cable to the
extension audio cable of the display.
2. (For 47LS33A and 55LS33A only)
Connect the power cable, infrared
control cable, and video cable to the
display.
3. (For B48F360 and B55F360 only)
Connect the video cable to the
extension video cable of the display.
4. (For B48F360 and B55F360 only)
Connect the power and audio cables to
the display. For details, see 15
Connecting Cables.