Table of Contents
Advertisement
Date: 2021-01-13
Version: 1.5
6
Maintenance and Repair
6.1
Notes
Maintenance personnel must be familiar and apply the general and special safety regulations
and recommendations of the employers' liability insurance association.
Observe the "Maintenance Schedule" of the complete documentation and the elec-
trical, pneumatic and hydraulic circuit diagrams.
Observe also the relevant chapters of the supplied purchased parts documentation!
The safety and accident prevention regulations given in these documentations must also be
observed.
Carry out maintenance and repair work as described in these documentations.
Any damage or malfunction must be remedied immediately by qualified specialist personnel.
Repairs must be carried out by the manufacturer or by briefed specialists.
If you have any questions, contact our customer service.
Before Start Maintenance work, observe the following points:
• The work described here must be carried out only with the plant depressurized and isolat-
ed from mains power.
• The plant must be secured against unauthorized restarting during this work
• Isolate the plant from its electrical supply and depressurize it.
© 2021 ABB Automation GmbH |
Operating and installation instructions
Central lubrication unit
Maintenance and Repair
DOCUMENTS REFERENCE
NOTE
IMPORTANT
Page 19 of 25
en
Advertisement
Table of Contents
