Safety; Proper Use; Realistically Predictable Misuse Fault; Safety Notes - ABB ZSD 2020 Operating And Installation Instructions

Central lubrication unit
Hide thumbs Also See for ZSD 2020:
Table of Contents

Advertisement

Date: 2021-01-13
Version: 1.5
2

Safety

2.1

Proper Use

This module is intended for industrial use in a commercial environment.
The central lubrication unit is integrated into the application plant and has the purpose of sup-
plying release agent (Mesamoll) to the dosing unit. This releases glue residue in the dosing unit
and purges the central lubrication unit. After coarse filtering in the process filter, fine filtering
takes place in the oil filter.
The intended use also includes:
• Compliance with the intervals indicated in the maintenance plan.
• Observe all notes in the documentation.
The components connected to this module are covered in separate instruction manuals.
Danger of life due to improper use!
The improper use of this assembly may result in death or serious injury to persons
who are on the assembly as well as serious damage to other property.
Intentional misuse of this assembly is prohibited.
The plant's owner/operator is liable for any injury or material damage resulting from improper
use of this assembly. The manufacturer does not accept liability in this case.
2.2

Realistically predictable misuse fault

► Use of materials and substances in the material supply (glue application) system other
than those approved for this assembly.
► Use of tools and aids other than those listed in these instructions.
2.3

Safety Notes

When working on or with the assembly, observe the following general safety instructions:
1. The safety instructions must be observed at all times to prevent accidents.
2. The Occupational Safety Provisions and Accident Prevention Regulations of the relevant
country are applicable in which the component is operated.
The operating company of the system is responsible for implementing these provi-
sions.
3. For work on the assembly, the personnel has to have access to personal protective
equipment such as protective work wear, safety gloves, helmet and safety goggles.
In addition, the following points must be observed during assembly:
© 2021 ABB Automation GmbH |
Operating and installation instructions
Central lubrication unit
Safety
DANGER
Page 9 of 25
en

Advertisement

Table of Contents
loading

Table of Contents