Connections; Table 6: The Connections Zsd - ABB ZSD 2020 Operating And Installation Instructions

Date: 2021-01-13
Version: 1.5
4.2

Connections

Figure 2: Connections
No. Description
1 Electrical connection for solenoid valve – control through local switch
2 Solenoid valve compressed-air inlet
Solenoid valve compressed air outlet – controls the double diaphragm pump (connection
3
no. 7)
4 Local switch – signal input from the controller
5 Hose connection – supply line to the double diaphragm pump (intake line)
6 Hose connection – supply line to the oil filter
7 Sensor-actuator plug – signal output from local switch to solenoid valve
8 Compressed air inlet to double diaphragm pump – controlled by solenoid valve
9 Material outlet of double diaphragm pump – Mesamoll supply line to dosing unit
10 Straight screw coupling – Mesamoll return line from dosing unit

Table 6: The Connections ZSD

For terminal assignment, cable types and lengths of the preassembled cables, see
the circuit diagram.
© 2021 ABB Automation GmbH |
Operating and installation instructions
Central lubrication unit
Description of the assembly
DOCUMENTS REFERENCE
Page 14 of 25
en