Operation; Control Panel; Selection Keys; Led's Status Indicators - ABB 8408608 User Manual

20 A B B U P S P R O D U C T S A N D S O L U T I O N S
—

4 Operation

This chapter describes how the UPS is operated
through the LCD.
The user can:
• Operate the LCD
• Start up and shut down the UPS (excluding the
commissioning start up)
• Operate additional SNMP adapters and their software
—

4 .1 Control panel

The user-friendly control panel has two parts:
—
20 Control panel

• Selection keys

• Power management LCD (PMD)
• Status LEDs
Battery mode
Online mode
Selection
Escape
—
20
LED's
Battery Load
20 100
Min %
LCD
Output
230 50
V
Hz
ESC
keys
Up Down Enter
4 .1 .1 Selection keys
—
Table 5: UPS selection keys
Button
Bypass mode
Fault
On/Off
4 .1 .2

LED's status indicators

—
Table 6: UPS selection keys
Indicator
NORMAL
(GREEN)
BATTERY
(ORANGE)
BYPASS
(ORANGE)
FAULT
(RED)
Function Illustration
Turn the UPS on
Power
and off or change
ON/OFF
operating mode.
Scroll up
Scroll UP
through the menu.
Scroll down
Scroll DOWN
through the menu.
Select and
Select / Edit
confirm settings.
Exit menus and
Exit / Mute
mute the buzzer.
Status Description
The UPS is operating
ON normally on online or on
high efficiency mode.
ON The UPS is in battery mode.
ON The UPS is in bypass mode.
Flash The UPS is in standby mode.
The UPS has an
ON
active alarm or fault.