Table of Contents
Advertisement
Figure 93
Front Axle
1. Drain plug
2. Drain pan
Figure 94
Rear Axle
1. Drain plug
2. Drain pan
2. Remove the plugs from the sight port and the drain
port of the pinion housings for the axles
and
Figure
94).
Note: Allow the oil to drain completely from the
pinion housing and axle.
3. Clean the threads of the plugs.
4. Apply PTFE thread sealing tape to the threads of the
plugs.
5. Install the drain plugs into the drain ports at the pinion
housings
(Figure 95
3. Drain port
4. Front-axle housing
3. Drain port
4. Rear-axle housing
(Figure 93
and
Figure
96).
1. Front-axle housing
2. Oil-servicing equipment
3. Fill plug
1. Rear-axle housing
2. Forward
3. Oil-servicing equipment
61
Figure 95
Front Axle
4. Pinion housing
5. Sight port
Figure 96
Rear Axle
4. Fill plug
5. Sight port
Advertisement
Table of Contents
