Table of Contents
Advertisement
Welding on the Machine
Important: Before you use an electric welder to repair
or modify the machine, perform all the following:
•
Rotate the battery-disconnect switch to the Off position
•
Disconnect the negative and positive battery cables.
•
Disconnect the wiring at the alternator.
•
Disconnect the 2 connectors for the computer module.
•
Disconnect the connector for the command-center
display.
After you complete welding on the machine, connect the
command–center display, computer module, alternator, and
battery cables and rotate the .battery-disconnect switch to
the On position
Preparing to Disconnect the
Components
1. Remove the right side panel; refer to
Side Panels (page
46).
2. Rotate the battery-disconnect switch to the Off
position; refer to
Battery-Disconnect Switch (page
3. Remove the 2 finger-pull covers from the holes in the
battery cover
(Figure
Note: The battery cover is located between the
operator seat and the rear ROPS bulkhead.
Figure 120
1. Operator seat
2. Finger-pull cover
3. Hole (battery cover)
4. Remove the 4 flange-head bolts (5/16 x 1 inch) that
secure the battery cover to the ROPS platform
120).
Removing the
120).
4. Flange-head bolts (5/16 x
1 inch)
5. Nut clip
6. ROPS bulkhead
5. Using the finger pulls, lift the battery cover up to
remove it from the ROPS platform
6. Remove the lock-washer nut (3/8 inch) securing the
negative-battery cable and ring terminal to the negative
stud of the battery and remove the cables from the
battery
21).
1. Positive-battery cable
2. Negative-battery cable
3. Ring terminal
7. Move back the insulator boot and remove the
lock-washer nut (3/8 inch) securing the positive-battery
cable to the positive stud of the battery and remove the
cable from the battery
Disconnecting the Alternator
Wiring
1. At the alternator, slide the boot off the terminal and
stud at the back of the alternator
(Figure
75
(Figure
121).
Figure 121
4. Lock-washer nut (3/8 inch)
5. Negative stud (battery)
6. Positive stud (battery)
(Figure
121).
(Figure
120).
(Figure
122).
Advertisement
Table of Contents
