Toshiba TOSVERT VF-AS3 Manual page 32

VF-AS3
bit Function
0 Control switching
Electric power quantity
1
reset
2 (Reserved)
3 Braking request (BC)
4 Preliminary excitation
5 (Reserved)
6 Braking answer (BA)
7 Quick deceleration 2
8 Acc/dec switching 1 (*1)
9 Acc/dec switching 2
10 V/f switching 1 (*2)
11 V/f switching 2
OC stall level switching
12 and
Torque limit switching 1
13 Torque limit switching 2
14 Speed gain switching
15 (Reserved)
Note: Set 0 to reserved bit.
(*1): The Acc/Dec switching ORs with Bit 6 of fa06. When changing Acc/Dec in four types, set Bit 6 of
fa06 to "0" and use fa23.
(*2): The V/f switching ORs with Bit 4 of fa06. When changing V/f in four types, set Bit 4 of fa06 to
"0" and use fa23.
Acceleration time 1 (acc) and deceleration time 1 (dec) are worked when cmod isn't "Communication
(*3):
option". If cmod is "Communication option", Acceleration and deceleration time 1 are worked by c860,
c862, c863, c865. See "7.1.
In this case, set 0(Linear) to acceleration/deceleration 1 pattern (f502: 0x2502). (S-pattern isn't
supported.) If S-pattern is needed, use acceleration/deceleration 2 or 3 or 4.
0
Speed control Torque control
OFF Reset
- -
Normal Forcibly braked
Normal Enabled
- -
Brake applied Brake released
Normal Enabled
00: AD mode 1
01: AD mode 2
10: AD mode 3
11: AD mode 4
00: V/f 1
01: V/f 2
10: V/f 3
11: V/f 4
00: Torque limit 1 / OC stall 1
01: Torque limit 2 / OC stall 2
10: Torque limit 3 / OC stall 1
11: Torque limit 4 / OC stall 2
Gain 1 Gain 2
- -
TOSHIBA Drive profile
- 31 -
1
-
Electric power quantity (fe76,
fe77) reset
-
-
-
-
-
-
Select Acc/Dec mode 1 - 4 by
combination of two bits.
AD mode 1: acc, dec *3
AD mode 2: f500, f501
AD mode 3: f510, f511
AD mode 4: f514, f515
Select V/f pattern 1 - 4 by
combination of two bits
V/f 1: pt= setting value, vl, vlv,
vb, thra
V/f 2: pt= "0", f170, f171,
f172, f182
V/f 3: pt= "0", f174, f175,
f176, f183
V/f 4: pt= "0", f178,
f179,f180, f184
OC stall 1: f601
OC stall 2: f185
Select torque limit 1 - 4 by
combination of two bits
Torque limit 1: f441, f443
Torque limit 2: f444, f445
Torque limit 3: f446, f447
Torque limit 4: f448, f449
Gain 1: f460, f461, f462
Gain 2: f463, f464, f465
-
" for the detailed information.
E6581818⑭
Note