Siemens SIMATIC IPC MD-34A Operating Instructions Manual page 57

Icon Hardware
function
Barcode
reader
RFID
MD-34A
Operating Instructions, 08/2023, A5E52427535-AA
Notes and additional steps
Requirement: The barcode reader has been configured and set up, see "Barcode reader
(Page 59)".
1. Open the program that is to display the barcode.
2. Orient the tablet to the barcode as shown:
3. To start the scan operation, press function key <Fn2> on the tablet.
4. Press the "Disconnect" button to disconnect from the barcode reader. To reconnect, press
the button again.
Switches the RFID Reader function on and off.
Operating the device
5.2 HotTab
57