Firmware/Bios Description; Open Firmware Selection Menu - Siemens SIMATIC IPC MD-34A Operating Instructions Manual

Firmware/BIOS description

7.1

Open firmware selection menu

Procedure
1. Switch on the device or restart the device.
2. Immediately after switching on the device, press the <Esc> key on the connected keyboard
and hold it down. Or you can press "F2" button on the back of the device immediately after
switching on the device.
The "Main Page" with the options of the firmware selection menu is open.
Firmware selection menu
The number of available options in the firmware selection menu depends on your device
version.
The following options are available:
Option
Continue
Boot Manager
Device Manager
Boot From File
Administer Secure Boot
Setup Utility
70
Function
Exit firmware selection menu and continue the boot proce-
dure.
Specify the boot media from which to start, for example:
• Windows Boot Manager
• EFI HTTP [IPv6]
• EFI HTTP [IPv4]
• EFI PXE 0 for IPv6
• EFI PXE 0 for IPv4
TLS Certificate Import or delete certificates for TLS processing.
Manager
RAM Disk Configu- Add or remove RAM disks.
ration
Driver Health List all driver health instances.
Manager
Network Device Select the network device according to the MAC address.
List
Boot from a file or device.
Configure device startup in "Secure Boot Modus". Software
modules will be loaded only when they are recognized by
the BIOS or the operating system as safe.
Start firmware configuration menu.
Operating Instructions, 08/2023, A5E52427535-AA
7
MD-34A