Pch-Fw Configuration; Security" Tab - Siemens SIMATIC IPC MD-34A Operating Instructions Manual

Firmware setting
TYPE A USB 2.0
7.2.2.4

PCH-FW Configuration

You can configure Management Engine Technology parameters here.
Calling "PCH-FW Configuration"
Select: "Setup Utility (Page 71)" > "Advanced" > "PCH-FW Configuration".
Firmware setting
ME Firmware
Version
ME Firmware
Mode
ME Firmware SKU
ME Firmware
State 1
ME Firmware
State 2
ME State
7.2.3

"Security" tab

Calling "Security" tab
Select: "Setup Utility (Page 71)" > "Security".
Firmware setting
Current TPM De-
vice
TPM State
TPM Active PCR
Hash Algorithm
TPM Hardware
Supported Hash
Algorithm
BIOS Supported
Hash Algorithm
TrEE Protocol Ver-
sion
MD-34A
Operating Instructions, 08/2023, A5E52427535-AA
Value
Disabled
Enabled
Value
Normal Mode
Consumer SKU
Disabled
Enabled
Value
1
1.0
1.1
Setting in delivery Meaning
state
Setting in delivery Meaning
state
Current ME (Management Engine)
firmware version.
If ME is disabled, it will be put into ME
Temporarily Disabled Mode.
x
Setting in deliv- Meaning
ery state
Show the version of current TPM (Trust-
ed Platform Module) device.
TrEE Protocol version 1.0 or 1.1.
x
Firmware/BIOS description
7.2 Configure firmware
75