Exit" Tab - Siemens SIMATIC IPC MD-34A Operating Instructions Manual

Firmware/BIOS description
7.2 Configure firmware
Firmware setting
Boot URI
Create boot op-
tion
7.2.5

"Exit" tab

Exit the Setup utility. You have the following options for saving or discarding the changes
you made:
Calling "Exit"
Choose: "Setup Utility (Page 71)" > "Exit".
Firmware setting
Exit Saving Changes
Save Change Without Exit
Exit Discarding Changes
Load Optimal Defaults
Load Custom Defaults
Save Custom Defaults
Discard Changes
78
Value Setting in deliv-
ery state
Meaning
All changes are saved.
The device is restarted with the changed firmware settings.
All changes are saved.
Setup utility remains open.
Setup Utility is closed.
All changes are discarded.
The firmware settings are reset to the safe default values.
The delivery state is restored.
NOTICE:
All current firmware settings are overwritten.
The user-specific profile with the user-specific firmware settings is
loaded.
Requirement:
The firmware settings were previously saved as user-specific profile
with "Save Custom Defaults".
NOTICE:
All current firmware settings are overwritten when loading the user-
specific profile with "Load Custom Defaults".
The current firmware settings are saved as a user-specific profile (see
also "Load Custom Defaults").
All changes to the firmware settings are discarded.
Meaning
A new boot option will be created ac-
cording to this Boot URI.
Operating Instructions, 08/2023, A5E52427535-AA
MD-34A