Technical Specifications For Accessories - Siemens SIMATIC IPC MD-34A Operating Instructions Manual

Technical data

8.2 Technical specifications for accessories

Device function
Environment
Safety function
Operator controls
Power supply
Certification
8.2 Technical specifications for accessories
Device function
Barcode reader
Accessories
82
Data
Docking connector
LAN
Expansion port
Relative air humidity during operation
Operating temperature
Storage temperature
Shock
Vibration
Drop test
Degree of protection
Trusted Platform Module (TPM) 2.0
Kensington lock
Buttons
Battery
Battery life
Nominal voltage
Power supply unit
Certification
Data
Barcode reader (optional)
Standard:
Optional
Value
1 × 19-pin docking connector
1 x connection RJ45-10/100/1000 Giga-
LAN
1 × expansion port for USB 3.0 / UART
(optional)
10% to 90%, no condensation
0 °C to 45 °C
-30 °C to 70 °C
MIL-STD-810H Method 516.8 Procedure
I
MIL-STD-810H Method 514.8 Procedure
I
MIL-STD-810H Method 516.8, 4 ft.
IP65 – protected against ingress of
dust, contact, and water jets from any
angle
Supported
Supported
1 × On/Off button
2 × programmable function key
11.4 V (typ. 3500 mAh), designed as a
lithium-ion battery (3S1P), can be re-
placed during operation (optional)
Standard battery: 6 hours
19 V DC
100–240 V, 50–60 Hz / 19 V DC
CE, FCC
Value
For 1D code and 2D code
Power supply unit and power supply
cord
Battery pack
Battery charger
Hand strap
Shoulder strap
Desk docking
Vehicle docking
Operating Instructions, 08/2023, A5E52427535-AA
MD-34A