HP 5334B Service Manual page 51

CHECKPOINT SUMMARY
1 Power-up Preset
2 Remote, Local, Local Lockout
3 Function Select
4 lnput Conditioning
-
Channel A
5
lnput Conditioning
-
Channel B
6
Trigger Levels
7
Gate Time
8
External Arming
9
Math Functions
10 Memory Recall (HP 5334A only)
11
Service Request
12 Status Byte
13 Send Error Code
14 High Speed Output
5. The next screen provides the option to receive a printed version of this summary.
6. Equipment setup instructions are provided (with reference made to the manual), then the HP 85 searches
for the address of the HP 5334B. This search eliminates the need to set the HP 5334B to a particular HP-IB
address and thus, allows an arbitrary address setting. If the address is not found, one or more of the follow-
ing may be the cause:
HP 5334B
-
not powered-up
-
in TALK ONLY mode (Addr 50)
Interface
-
not connected
-
defective
Address of
HP 5334B
-
set to 721 (controller address)
-
set' to 731-749 (not valid addresses)
7. After these initial steps, the program begins the checkpoint execution. The HP 85 display provides the
description and operator instructions as each checkpoint is performed.
8. At the end of most of the checkpoints, the HP 85 displays the following prompt:
HP 5334B
-
Service Manual
4-41