20
TA B L E O F C O N T E N T S
Step 1
Step 2
A
A
≔
P R E V I O U S C H A P T E R
B
←
→
N E X T C H A P T E R
Move the holster inlet
Procedure
1. Remove 2 screws and remove the front cover.
2. Remove 11 screws and remove the maintenance door.
3. Remove the screw (A) on the left side of socket.
4. Move the holster inlet away.
Install the mounting screws
Procedure
1. Install the mounting screws (A) through the holes (B)
in the charger.
2. Lock the screws in the anchors. For the specification,
refer to chapter
Technical data, page 32.