TA B L E O F C O N T E N T S
Side 1
A
1-2 mm
≔
P R E V I O U S C H A P T E R
1-2 mm
0-1 mm
←
→
N E X T C H A P T E R
Install the mechanical lugs for L1, L2, option 1
Procedure
1. Loosen the screws (A)
2. Strip the wires. For the specification, refer to chapter
Technical data, page 32.
3. Insert the wire into side 1 of the mechanical lug
to its full insertion length.
4. Tighten the screws (A) to the correct torque.
For the specification, refer to chapter
page 32.
Install the cold-pressed terminal for L1, L2, option 2
Procedure
1. Strip the wires. For the specification, refer to chapter
Technical data, page 32.
2. Insert the wire into the cold-pressed terminal to its full
insertion length. Crimp the cold-pressed terminal with the
correct jaws.
0-1 mm
3. Finished.
23
Technical data,