Table of Contents
Advertisement
34
TA B L E O F C O N T E N T S
Mechanical
Mounting
Dimensions
Weight 40/80 A
Torque specifications
Cabinet cover screws
Inner cabinet/ maintenance cover screws
Display board screws
AC input screws
AC input mechanical lug
EV charge cable screws
Holster inlet screw
Terminal block, external meter, input and output
Mounting screws
Wire specifications
AC input mechanical lug
AC input cold pressed ring terminal 80A
AC input cold pressed ring terminal 40A
PE cold pressed ring terminal
Terminal block, external meter, input and output
Certification and standards
Safety standards
Codes and standards
Certification
Warranty
AC input cable
Cable shielding (optional)
Diameter of the phase conductors
Diameter of the PE conductor
• Consult your local electrical codes for the correct wire size, based on the environment, the conductor type and
the rating of the EVSE
• The wire AWG is based on the copper wire type
≔
P R E V I O U S C H A P T E R
Wall or floor using a pedestal
H × W × D
15.75 × 9.06 × 4.92 in (400 × 230 × 125 mm)
23,80 lb / 26,01 lb (10.8 kg / 11.8 kg)
0.9 Nm / 7,96 lb-in
0.9 Nm / 7,96 lb-in
0.6 Nm / 5,31 lb-in
2.5 Nm / 22,12 lb-in
2.0 Nm / 17,70 lb-in
2.5 Nm / 22,12 lb-in
0.7 Nm / 6,19 lb-in
0.5 Nm / 4,42 lb-in
4.4 Nm / 38,94 lb-in
Strip length 0.55 in (14 mm), supported range 8 - 2 AWG (8.36 - 35 mm²)
Strip length 0.55 in (14 mm), 2 AWG (35 mm²)
Strip length 0.55 in (14 mm), 6 AWG (13 mm²)
Strip length 0.33 in (8.5 mm), 8 AWG (8,36 mm²)
Strip length 0.19 in (5 mm), supported AWG range 24 - 12 (0.20 - 3,3 mm²)
UL 2594, UL 2231-1, UL 2231-2, UL 1998, CSA C22.2. NO.280, NMX-J-667-ANCE
FCC Part 15 Class B, ENERGY STAR
SGS
24 months
The local rules require shielded cables.
The cable shielding must be connected to the PE rail at the two ends of the cable
Refer to the local rules
The same as the diameter of the phase conductors
←
Advertisement
Table of Contents
