Install the server into the rack.
13. Connect all peripheral cables to the server.
14. Connect each power cord to the server.
15. Connect each power cord to the power source.
16. Power up the server .
17. Properly dispose of the old battery.
For more information about proper battery disposal, contact an authorized reseller or an authorized service provider.
System board replacement
System board replacement
Removing the system board assembly
Installing the system board assembly
Re-entering the server serial number and product ID
Removing the system board assembly
Removing the system board assembly
Prerequisites
Prerequisites
Before you perform this procedure, make sure that you have the following items available:
T-15 Torx screwdriver
Hex screwdriver—This tool is required only if the serial port cable is installed.
Alcohol wipe
HPE ProLiant ML30 Gen10 Plus Server Maintenance and Service Guide
109