Power Up The Server; Removing And Replacing The Front Bezel - HP ProLiant ML30 Gen10 Plus Maintenance And Service Manual

Power up the server

Power up the server
To power up the server, use one of the following methods:
Press the Power On/Standby button.
Use the virtual power button through iLO 5.

Removing and replacing the front bezel

Removing and replacing the front bezel
Procedure Procedure
1. Unlock the front bezel.
2. Open the front bezel.
3. Pull the front bezel away from the chassis.
HPE ProLiant ML30 Gen10 Plus Server Maintenance and Service Guide 40