HP ProLiant ML30 Gen10 Plus Maintenance And Service Manual page 4

Remove the server from the rack
Remove the access panel
Remove the air baffle
Remove the PCI blank retainer
Remove a media drive
Power up the server
Removing and replacing the front bezel
Drive replacement
Removing and replacing a non-hot-plug LFF SATA drive
Removing and replacing a hot-plug LFF SAS or SATA drive
Removing and replacing a hot-plug SFF SAS or SATA drive
Drive backplane replacement
Removing and replacing the 4 LFF hot-plug drive backplane
Removing and replacing the 8 SFF hot-plug drive backplane
Power supply replacement
Power supply warnings and cautions
Removing and replacing a Flexible Slot power supply
Removing and replacing the non-hot-plug power supply
Removing and replacing the power distribution board
Removing and replacing the power supply blank
Removing and replacing drive blanks
Media device replacement
Removing and replacing a SAS LTO tape drive
Removing and replacing a USB RDX docking station
Removing and replacing an optical drive
Removing and replacing the media bay blank
Removing and replacing the air baffle
Fan replacement
Removing and replacing the PCI fan
Removing and replacing the system fan
Removing and replacing the energy pack
Removing and replacing a DIMM
Removing and replacing the energy pack holder
Heatsink replacement
Removing the heatsink
Installing the heatsink
Processor replacement
Processor cautions
Removing the processor
Installing the processor
Removing and replacing an expansion card
Removing and replacing an M.2 SSD
Removing and replacing the iLO-M.2-serial module
M.2 SATA SSD option replacement