HP ProLiant ML30 Gen10 Plus Maintenance And Service Manual page 90

11. Remove the M.2 SATA SSDs from the add-in card.
Retain these SSDs for installation onto the new add-in card.
To replace the component, reverse the removal procedure.
Removing and replacing the M.2 SATA SSD from the add‑in card Removing and replacing the M.2 SATA SSD from the add
CAUTION: CAUTION:
A discharge of static electricity from a finger or other conductor might damage system boards or other static-sensitive
devices. To prevent damage, observe antistatic precautions.
CAUTION: CAUTION:
To prevent improper cooling and thermal damage, do not operate the server unless all PCIe slots have either an
expansion slot cover or an expansion card installed.
Prerequisites Prerequisites
in card
HPE ProLiant ML30 Gen10 Plus Server Maintenance and Service Guide 90