Dimm Slot Location; Dimm Label Identification - HP ProLiant ML30 Gen10 Plus Maintenance And Service Manual

Position Position Default Default
1
S5 Off
1 , 2 , 3
S6 Off
S7 Off
S8 —
S9 —
S10 —
S11 —
S12 —
1
To access the redundant ROM, set S1, S5, and S6 to On.
2
When the system maintenance switch position 6 is set to the On position, the system is prepared to restore all configuration settings
to their manufacturing defaults.
3
When the system maintenance switch position 6 is set to the On position and Secure Boot is enabled, some configurations cannot be
restored. For more information, see Configuring security.

DIMM slot location

DIMM slot location
The arrow points to the front of the server.

DIMM label identification

DIMM label identification
To determine DIMM characteristics, see the label attached to the DIMM. The information in this section helps you to use the label to
locate specific information about the DIMM.
For more information about product features, specifications, options, configurations, and compatibility, see the HPE DDR4
SmartMemory QuickSpecs on the Hewlett Packard Enterprise website (https://www.hpe.com/support/DDR4SmartMemoryQS
Function Function
Off = Power-on password is enabled.
On = Power-on password is disabled.
Off = No function
On = Restore default manufacturing settings
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
HPE ProLiant ML30 Gen10 Plus Server Maintenance and Service Guide
https://www.hpe.com/support/DDR4SmartMemoryQS).
132