D-Link DES-3010G Command Line Interface Reference Manual page 32

DES-3010F / DES-3010G / DES-3018 / DES-3026 Layer 2 Switch CLI Reference Manual
DES-3026:4#show snmp user
Command: show snmp user
Username
--------------- ---------------
initial
Total Entries: 1
DES-3026:4#
create snmp view
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create an SNMP view:
DES-3026:4#create snmp view dlinkview 1.3.6 view_type included
Command: create snmp view dlinkview 1.3.6 view_type included
Success.
DES-3026:4#
Group Name SNMP Version Auth-Protocol PrivProtocol
------------
initial V3
Used to assign views to community strings to limit which MIB objects
and SNMP manager can access.
create snmp view <view_name 32> <oid> view_type [included |
excluded]
The create snmp view command assigns views to community strings
to limit which MIB objects an SNMP manager can access.
<view_name 32> − An alphanumeric string of up to 32 characters
that identifies the SNMP view that will be created.
<oid> − The object ID that identifies an object tree (MIB tree) that will
be included or excluded from access by an SNMP manager.
included − Include this object in the list of objects that an SNMP
manager can access.
excluded − Exclude this object from the list of objects that an SNMP
manager can access.
Only administrator-level users can issue this command.
------------- ------------
None None
30