Enable Snmp Traps; Disable Snmp Traps - D-Link DES-3010G Command Line Interface Reference Manual

DES-3010F / DES-3010G / DES-3018 / DES-3026 Layer 2 Switch CLI Reference Manual
delete trusted_host
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To delete a trusted host with an IP address 10.48.74.121:
DES-3026:4#delete trusted_host 10.48.74.121
Command: delete trusted_host 10.48.74.121
Success.
DES-3026:4#

enable snmp traps

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable SNMP trap support on the Switch:

disable snmp traps

Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
Used to delete a trusted host entry made using the create
trusted_host command above.
delete trusted _host <ipaddr>
This command is used to delete a trusted host entry made using the
create trusted_host command above.
<ipaddr> − The IP address of the trusted host.
Only administrator-level users can issue this command.
Used to enable SNMP trap support.
enable snmp traps
The enable snmp traps command is used to enable SNMP trap
support on the Switch.
None.
Only administrator-level users can issue this command.
DES-3026:4#enable snmp traps
Command: enable snmp traps
Success.
DES-3026:4#
Used to disable SNMP trap support on the Switch.
disable snmp traps
This command is used to disable SNMP trap support on the
Switch.
None.
Only administrator-level users can issue this command.
43