Delete Snmp Host; Show Snmp Host; To Delete An Snmp Host Entry; To Display The Currently Configured Snmp Hosts On The Switch - D-Link DES-3010G Command Line Interface Reference Manual

DES-3010F / DES-3010G / DES-3018 / DES-3026 Layer 2 Switch CLI Reference Manual

delete snmp host

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:

To delete an SNMP host entry:

show snmp host

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:

To display the currently configured SNMP hosts on the Switch:

DES-3026:4#show snmp host
Command: show snmp host
SNMP Host Table
Host IP Address SNMP Version
---------------
10.48.76.23
10.48.74.100
Total Entries: 2
DES-3026:4#
Used to remove a recipient of SNMP traps generated by the Switch's
SNMP agent.
delete snmp host <ipaddr>
The delete snmp host command deletes a recipient of SNMP traps
generated by the Switch's SNMP agent.
<ipaddr> − The IP address of a remote SNMP manager that will
receive SNMP traps generated by the Switch's SNMP agent.
Only administrator-level users can issue this command.
DES-3026:4#delete snmp host 10.48.74.100
Command: delete snmp host 10.48.74.100
Success.
DES-3026:4#
Used to display the recipient of SNMP traps generated by the
Switch's SNMP agent.
show snmp host {<ipaddr>}
The show snmp host command is used to display the IP addresses
and configuration information of remote SNMP managers that are
designated as recipients of SNMP traps that are generated by the
Switch's SNMP agent.
<ipaddr> − The IP address of a remote SNMP manager that will
receive SNMP traps generated by the Switch's SNMP agent.
None.
---------------------
V2c
V3
Community Name / SNMPv3 User Name
------------------------------
private
public
40