Show Snmp Groups; To Display The Currently Configured Snmp Groups On The Switch - D-Link DES-3010G Command Line Interface Reference Manual

DES-3010F / DES-3010G / DES-3018 / DES-3026 Layer 2 Switch CLI Reference Manual

show snmp groups

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:

To display the currently configured SNMP groups on the Switch:

DES-3026:4#show snmp groups
Command: show snmp groups
Vacm Access Table Settings
Group
ReadView Name
WriteView Name
Notify View Name : NotifyView
Security Model
Security Level
Group
ReadView Name
WriteView Name
Notify View Name : NotifyView
Security Model
Security Level
Group
ReadView Name
WriteView Name
Notify View Name : NotifyView
Security Model
Security Level
Group
ReadView Name
WriteView Name
Notify View Name : NotifyView
Security Model
Security Level
DES-3026:4#delete snmp group sg1
Command: delete snmp group sg1
Success.
DES-3026:4#
Used to display the group-names of SNMP groups currently
configured on the Switch. The security model, level, and status of
each group are also displayed.
show snmp groups
The show snmp groups command displays the group-names of
SNMP groups currently configured on the Switch. The security
model, level, and status of each group are also displayed.
None.
None.
Name : Group3
: ReadView
: WriteView
: SNMPv3
: NoAuthNoPriv
Name : Group4
: ReadView
: WriteView
: SNMPv3
: authNoPriv
Name : Group5
: ReadView
: WriteView
: SNMPv3
: authNoPriv
Name : Group6
: ReadView
: WriteView
: SNMPv3
: authPriv
37