Using The Accessories - Electrolux EOC5651CAX User Manual

USING THE ACCESSORIES

WARNING!
Refer to "Safety information" chap-
ter.
CORE TEMPERATURE SENSOR
The core temperature sensor measures the
core temperature of the meat. When the
meat is at the set temperature, the appli-
ance deactivates.
There are two temperatures to be set:
• The oven temperature. Refer to the table
for roasting.
• The core temperature. Refer to the table
for the core temperature sensor.
Only use the core temperature sen-
sor supplied with the appliance, or
genuine replacement parts.
1. Set the oven function and the oven
temperature.
2.
Put the point of the core temperature
sensor (with the symbol
handle) into the centre of the meat.
3. Put the plug of the core temperature
sensor into the socket on the front of
the appliance. The display shows the
symbol of the core temperature sensor
and the default core temperature.
When you use the core temperature
sensor for the first time, the default
core temperature is 60 °C.
4.
While
knob for the temperature to change
the default core temperature.
on the
flashes, you can use the
5.
Press to save the new core tem-
perature, or wait 10 seconds for the
setting to be saved automatically. The
new default core temperature is dis-
played during the next use of the core
temperature sensor.
6. Make sure that the core temperature
sensor stays in the meat and in the
socket during the cooking.
7.
When the meat is at the set core tem-
perature, the symbol for the core tem-
perature and the core temperature
sensor flash. An acoustic signal
sounds for two minutes. Press a but-
ton to stop the signal.
8. Remove the plug of the core tempera-
ture sensor from the socket . Remove
the meat from the appliance.
9. Deactivate the appliance.
Every time you put the core tem-
perature sensor in the socket, you
need to set the duration and end
time again.
When the appliance calculates the
provisional duration time for the
first time, the symbol - flashes in
the display. When the calculation
ends, the display shows the dura-
tion of the cooking. Calculations
run in the background during the
cooking and the duration value in
the display is updated if necessary.
You can change the core temperature
at any time during the cooking:
1.
Press the temperature button
– One time - the display shows the set
core temperature which changes ev-
ery 10 seconds to the current core
temperature.
– Two times - the display shows the
current oven temperature which
changes every 10 seconds to the
set oven temperature.
– Three times - the display shows the
set oven temperature.
2.
Use the knob for the temperature to
change the temperature.
ENGLISH 13
: