Dell PowerConnect B-DCX-4S Backbone Hardware Reference Manual page 94

5
RRP: PowerConnect B-DCX-4S chassis
2. Enter the slotShow -m command and verify that all the installed cards are detected and that
3. Verify that the PowerConnect B-DCX-4S is functioning correctly by typing switchShow or
4. Verify that all the IP address information is correct by typing ipAddrShow and checking the
80
their status is operational (enabled).
switch:admin> slotShow -m
Slot Blade Type ID
--------------------------------------------
1 SW BLADE 51
2 UNKNOWN
3 CORE BLADE 46
4 CP BLADE 50
5 CP BLADE 50
6 CORE BLADE 46
7 AP BLADE 75
8 SW BLADE 51
switch:admin>
switchStatusShow.
This switchShow command displays PowerConnect B-DCX-4S and port status information.
switch:admin> switchshow
switchName: switch
switchType: 62.1
switchState: Online
switchMode: Native
switchRole: Subordinate
switchDomain: 11
switchId: fffc0b
switchWwn: 10:00:00:05:1e:39:59:67
zoning: OFF
switchBeacon: OFF
blade3 Beacon: OFF
blade5 Beacon: OFF
blade8 Beacon: OFF
blade10Beacon: OFF
Index Slot Port
===========================================================
32 3 0
33 3 1
34 3 2
35 3 3
36 3 4
10:00:00:00:c9:51:00:2d
37 3 5
switch:admin>
results against the IP information recorded in the "config-miscinfo.txt" file.
switch:admin> ipaddrshow
Model Name Status
FC8-48 ENABLED
VACANT
CR4S-8 ENABLED
CP8 ENABLED
CP8 ENABLED
CR4S-8 ENABLED
FX8-24 ENABLED
FC8-48 ENABLED
Address Media Speed
0b2000 id N4
0b2100 __ N8
0b2200 __ N8
0b2300 __ N8
0b2400 id N4
0b2500 __ N8
PowerConnect B-DCX-4S Backbone Hardware Reference Manual
State Proto
Online L-Port 5 public
No_Module
No_Module
No_Module
Online F-Port
No_Module
53-1001808-01