Work Clamp - Brother BAS-364E Instruction Manual

Chapter 4 CORRECT OPERATION

7. Work clamp

If the power switch and air need to be left on when carrying out some adjustment, be extremely careful to
observe all safety precautions.
Do not touch any of the moving parts or press any objects against the machine when making adjustments,
as this may result in personal injury or damage to the machine.
Note
Do not touch the upper work clamp mechanism, eject mechanism, upper work clamp, work clamp or cassette
when depressing or pressing the work clamp lifter switch to operate the eject mechanism or the upper work clamp,
otherwise injury may result.
<When using the eject function>
Eject
e
The following two methods of setting the work clamp can be selected by means of the memory switch on the operation
panel.
Refer to "Chapter 11 CHANGING SPECIAL FUNCTIONS AND USING THE MEMORY SWITCHES".
Air bags specification: The upper work clamp w is not equiped.
<When using the eject function>
1. Set the memory switcn No. 03 to on .
2. Depress the work clamp lift switch q.
The upper work clamp w will be raised, and the eject mechanism will open and release the cassette e.
G
3. Insert the cassette e.
The cassette e will be secured and the upper work clamp w will be lowered automatically.
G
<When not using the eject function>
1. Set the memory switch No. 03 to oFF.
2. Depress the work clamp lift switch q.
The upper work clamp w only will be raised.
G
The cassette e will not be released.
G
3. Depress the work clamp lift switch q once more.
The upper work clamp w will be lowered.
G
17
CAUTION
Eject
w
e
BAS-364E, 366E, 370E, 375E
q
<When not using the eject function>
w
e