Brother BAS-364E Instruction Manual page 61

Chapter 11 CHANGING SPECIAL FUNCTIONS AND USING THE MEMORY SWITCHES
I Memory switches [30] - [3F] (Set using numbers instead of [on] or [oFF])
SW. No. Setting range
memo-30
1 - 999
1 - 4
memo-31
4 - 8
memo-32
memo-33 1 - 7
memo-34 1 - 5
memo-35 1 - 5
memo-36 -
memo-37 0
memo-38 -
memo-39 0 - 11
memo-3A
-
memo-3b -
memo-3c -
memo-3d -
memo-3E -
memo-3F -
memo-39
Setting 0 Sensor home position
range 1
Center of sewing frame
2 Upper-left of sewing frame
3 Lower-left of sewing frame
4 Upper-right of sewing frame
5 Lower-right of sewing frame
6 Sewing start point
7 Sewing end point
8 Upper-left of sewing pattern
9 Lower-left of sewing frame
10 Upper-right of sewing frame
11 Lower-right of sewing frame
55
Units Default
✕10 ms
10 Timer from after presser foot rises until feed starts operating
Changes the feeding speed (test feed).
- 1
1 (High)
Changes the allowed speed for the sewing pitch.
- 4
4 (High)
Thread trimming timing
- 3
1 (Early) , 3 (Standard) / 7 (late)
stitch 2 No. of low-speed stitches at the sewing start
stitch 2 No. of low-speed stitches at the sewing end
- 0 -
Automatically corrects the gear speed when reading 2DD disks.
- 0
0: No automatic correction
- - -
- 0 Reference point for enlargement/reduction using the operation panel
- 0 -
- 0 -
- 0 -
- 0 -
- 0 -
- 0 -
BAS-364E, 366E, 370E, 375E
Description
4 (Low)
8 (Low)