Brother BAS-364E Instruction Manual page 28

Compatible types of floppy disk
Data type
370E type
Tajima embroidery data
20,000 stitches per pattern
10 patterns
Old 370A type
Up to a maximum of 200,000 stitches
The above 3 types of data can all be read, but when writing to disk, all data is automatically converted to 370E data
when writing to 2HD disks and old 370 data when writing to 2DD disks.
When using a 2HD disk, use a disk which has been pre-formatted as a 1.44 MB disk. (The programmer can be
used to format these disks. Refer to the programmer instruction manual for details.)
TFD embroidery data can be embroidered after it has been converted by the programmer to BAS-370E data.
Restriction on using 2DD floppy disks.
In order to maintain compatibility with the old 370 series, the following restrictions have been placed on the use of
the new functions which have been added to the E series.
Restricted function
Resolution
Split function during
embroidering
Expansion option output
* BAS-370E series can not set needle down stop.
No. of stitches programmed
20,000 stitches per pattern
100 pattern Up to a maxi-
mum of 360,000 stitches
50,000 stitches per pattern
Old 370 series (2DD)
370E series (2HD)
0.1 mm/pulse
Not available
Not available
BAS-364E, 366E, 370E, 375E
Data resolution
0.05 mm/pulse
0.1 mm/pulse
0.1 mm/pulse
Applicable command
0.05 mm/pulse
[ 220 ] L [ 221 ] L
*Available
[ 230 ] L [ 231 ] L
Available
Chapter 5 OPERATING PROCEDURE
Format
Disk
2HD
1.44 MB
Automatically
2DD
formatted
Write enabled
Yes
No
Yes
22