Operation Flow Chart - Brother BAS-364E Instruction Manual

OPERATION FLOW CHART

OPERATION FLOW CHART
Power switch ON
Insert floppy disk
Press the PROGRAM
No. select switch
Press the Program
Read/Write switch
Restart
Depress work clamp
lift switch
Depress work clamp
lift switch
Test switch ON
Depress start switch
Depress start switch
Test switch OFF
Depress start switch
One machine cycle completed
61
Start
Reads program from disk
Work clamp rises
Set the work piece
Work clamp descends
TEST indicator illuminates
Work clamp stops at
sewing start position
Feed drive (confirm
needle descent, stepping
foot and work clamp
operation)
Feed stop
TEST indicator goes out
Machine, feed operate
Max. 2,000 rpm or
3,200 rpm
Thread trimming
Stop
Work clamp rises
BAS-364E, 366E, 370E, 375E
To change pattern
Power switch ON
Press the PROGRAM
No. select switch
Select the program
Press the Program
Read/ Write switch
Press the work clamp
lift switch (if the work
clamp is down)
Depress work clamp
lift switch
When thread breaks or bobbin
thread runs out
Press emergency
stop switch
Press emergency
stop switch
Press STEP BACK
switch
Press STEP BACK
switch
Read program from disk
Work clmap rises
(Replace presser foot,
feed plate, confirm
needle descent)
(Set material in place)
Work clamp descends
Machine stops, alarm
sounds
Remove problem
Thread trimmer operates,
alarm stops
Work clamp moves one
stitch at a time in reverse
Work clamp stops