Chapter 5 OPERATING PROCEDURE
5. Adjusting the sewing speed control
The sewing speed can be changed in steps of 100 rpm to the appropriate speeds for each stitch length setting.
o
y
6. Changing the X-scale and Y-scale settings
u
i
y
25
!2
!7
!2
!7
BAS-364E, 366E, 370E, 375E
1. Press the MENU switch y until the SPEED indicator
o illuminates.
2. While pressing the STEP BACK switch !7 , turn the dial
!2 until the desired speed is displayed.
• The display will change in steps of 10 rpm.
1. Press the MENU switch y until the X-SCALE indicator
u or the Y-SCALE indicator i illuminates.
2. While pressing the STEP BACK switch !7 , turn the dial
!2 until the desired ratio desires on the display.
• The scale setting is displayed as a percentage.
3. The program number will flash, and after the home
position is detected the flashing will stop.