Unified Access Point Administrator's Guide
Configuring Email Alert
The Email Alert feature allows the AP to automatically send email messages when an event at or above the
configured severity level occurs. Use the Email Alert Configuration page to configure mail server settings, to set
the severity level that triggers alerts, and to add up to three email addresses where urgent and non‐urgent
email alerts are sent.
Note: Email alert is operationally disabled when the AP transitions to managed mode.
Field
Email Alert Global Configuration
Admin Mode
From Address
Log Duration
D-Link
November 2011
Figure 32: Configuring Email Alert
Table 41: Email Alert Configuration
Description
Globally enable or disable the Email Alert feature on the AP. By default, email alerts
are disabled.
Specify the email address that appears in the From field of alert messages sent from
the AP, for example dlinkAP23@foo.com. The address can be a maximum of 255
characters and can contain only printable characters. By default, no address is
configured.
This duration, in minutes, determines how frequently the non critical messages are
sent to the SMTP Server.The range is 30‐1440 minutes. The default is 30 minutes.
Configuring Email Alert
Unified Access Point Administrator's Guide
Page 106