D-Link DWL-3600AP Administrator's Manual page 175

Unified Access Point Administrator's Guide
6. Configure the remaining settings:
• Source IP Address: 192.168.1.0
• Wild Card Mask: 0.0.0.255
• Source Port: Select the option
• Select From List (Source Port): www
7. Click Apply to save the rule.
8. Select New Rule from the Rule menu and create another rule with the following settings:
• Action: Permit
• Match Every: Clear the option
• Protocol: IP
• Address: 192.168.1.23
• Wild Card Mask: 0.0.0.0
9. Click Apply to save the rule.
10. Navigate to the Client QoS > VAP QoS Parameters page.
11. For the Client QoS Global Admin Mode option, select Enabled.
12. From the VAP menu, select VAP 2.
13. Select the Enabled option for Client QoS Mode.
D-Link
November 2011
Configuring Client QoS
Unified Access Point Administrator's Guide
Page 175