Table 43: Snmpv3 Views - D-Link DWL-3600AP Administrator's Manual

Unified Access Point Administrator's Guide
Table 43 describes the fields you can configure on the SNMPv3 Views page.
Field Description
View Name Enter a name to identify the MIB view.
View names can contain up to 32 alphanumeric characters.
Type Specifies whether to include or exclude the view subtree or family of subtrees from the
MIB view.
OID Enter an OID string for the subtree to include or exclude from the view.
For example, the system subtree is specified by the OID string .1.3.6.1.2.1.1.
Mask The OID mask is 47 characters in length. The format of the OID mask is xx.xx.xx (.)... or
xx:xx:xx.... (:) and is 16 octets in length. Each octet is 2 hexadecimal characters separated
by either . (period) or : (colon). Only hex characters are accepted in this field. For
example, OID mask FA.80 is 11111010.10000000.
A family mask is used to define a family of view subtrees. The family mask indicates which
sub‐identifiers of the associated family OID string are significant to the family's
definition.
A family of view subtrees allows control access to one row in a table, in a more efficient
manner.
SNMPv3 Views This field shows the MIB views on the UAP. To remove a view, select it and click Remove.
Note: After you configure the SNMPv3 Views settings, you must click Apply to apply the changes and
to save the settings.
D-Link
November 2011
Table 43: SNMPv3 Views
Configuring SNMPv3 Views
Unified Access Point Administrator's Guide
Page 112