D-Link DWL-3600AP Administrator's Manual page 137

Unified wired & wireless access system
Hide thumbs Also See for DWL-3600AP:
Table of Contents

Advertisement

Unified Access Point Administrator's Guide
Field
MAC ACL
EtherType
Class of Service
Source MAC Address
Source MAC Mask
Destination MAC 
Address
Destination MAC Mask
VLAN ID
After you set the desired rule criteria, click Apply. To delete an ACL, select the Delete ACL option and click 
Apply. 
D-Link
November 2011
Table 53:  ACL Configuration (Cont.)
Description
Select the EtherType field to compare the match criteria against the value in the 
header of an Ethernet frame. 
Select an EtherType keyword or enter an EtherType value to specify the match 
criteria.
Select from List Select
Select one of the following protocol types:
• appletalk
• arp
• ipv4
• ipv6
• ipx
• netbios
• pppoe
Match to Value
Enter a custom protocol identifier to which packets are matched. The value is a four‐
digit hexidecimal number in the range of 0600  –   F FFF.
Select this field and enter an 802.1p user priority to compare against an Ethernet 
frame.
The valid range is 0  –   7 . This field is located in the first/only 802.1Q VLAN tag.
Select this field and enter the source MAC address to compare against an Ethernet 
frame.
Select this field and enter the source MAC address mask specifying which bits in the 
source MAC to compare against an Ethernet frame.
A 0 indicates that the address bit is significant, and an f indicates that the address 
bit is to be ignored. A MAC mask of 00:00:00:00:00:00 matches a single MAC 
address.
Select this field and enter the destination MAC address to compare against an 
Ethernet frame.
Enter the destination MAC address mask specifying which bits in the destination 
MAC to compare against an Ethernet frame. 
A 0 indicates that the address bit is significant, and an f indicates that the address 
bit is to be ignored. A MAC mask of 00:00:00:00:00:00 matches a single MAC 
address.
Select this field and enter the VLAN IDs to compare against an Ethernet frame. 
This field is located in the first/only 802.1Q VLAN tag.
Managing Client QoS ACLs
Unified Access Point Administrator's Guide
Page 137

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dwl-6600apDwl-8600ap

Table of Contents