Table 44: Snmpv3 Groups - D-Link DWL-3600AP Administrator's Manual

Unified Access Point Administrator's Guide
Field Description
Name Specify a name to use to identify the group. The default group names are RW and RO.
Group names can contain up to 32 alphanumeric characters.
Security Level Select one of the following security levels for the group:
• noAuthentication‐noPrivacy — N o authentication and no data encryption (no
• Authentication‐noPrivacy — A uthentication, but no data encryption. With this
• Authentication‐Privacy — A uthentication and data encryption. With this security
For groups that require authentication, encryption, or both, you must define the MD5
and DES key/passwords on the SNMPv3 Users page.
Write Views Select the write access to management objects (MIBs) for the group:
• write‐all — T he group can create, alter, and delete MIBs.
• write‐none — T he group is not allowed to create, alter, or delete MIBS.
Read Views Select the read access to management objects (MIBs) for the group:
• view‐all — T he group is allowed to view and read all MIBs.
• view‐none — T he group cannot view or read MIBs.
SNMPv3 Groups This field shows the default groups and the groups that you have defined on the AP. To
remove a group, select the group and click Remove.
Note: After you configure the SNMPv3 Groups settings, you must click Apply to apply the changes and
to save the settings.
D-Link
November 2011
Table 44: SNMPv3 Groups
security).
security level, users send SNMP messages that use an MD5 key/password for
authentication, but not a DES key/password for encryption.
level, users send an MD5 key/password for authentication and a DES key/password
for encryption.
Configuring SNMPv3 Groups
Unified Access Point Administrator's Guide
Page 114