HP 1200 series Basic Manual page 13

For best results, adjust the paper settings each time you change paper types. For more
information, see "Set the paper type."
1 Pull out the bottom (input) tray, and slide the paper-width and -length adjusters to
their outermost positions.
2 Tap the stack on a flat surface to even the edges of the paper, and then check the
paper for the following:
• Make sure it is free of rips, dust, wrinkles, and curled or bent edges.
• Make sure all the paper in the stack is the same size and type, unless you are
working with photo paper.
3 Insert paper into the input tray, print-side down and letterhead or top of page first,
until it stops.
Chapter 3—Load paper or transparency film, or load originals
HP Fax 1200 Series
7