HP 1200 series Basic Manual page 23

Your unit lets you restore the original copy settings to what they were when you
purchased it.
1 Press Menu.
2 Press 1, and then press 7.
Press ENTER to restore the factory default settings.
3
The factory default settings are restored.
In addition to supporting standard copy jobs, your unit supports special jobs such as
copying photos. This section describes the settings that you should select prior to
pressing the Start Copy button.
Photo Mode temporarily turns Text Enhancements off and Enhance Light Colors on for
optimal copying of a photo. You do not have to adjust these settings yourself.
1 Press Menu.
2 Press 1, and then press 1 again.
3 Press
4 With Photo Mode On visible, press ENTER to select it.
A filled circle indicates the selected state.
5 If you are using photo paper, do the following:
• Press Menu.
• Press 1, and then press 2.
• Press
For more information, see "Recommended paper-type settings for copying."
Chapter 4—Use the copy features
to switch between Off and On.
until Photo Paper appears, and then press ENTER to select it.
HP Fax 1200 Series
17