HP 1200 series Basic Manual page 16

HP Fax 1200 Series
After you have loaded paper or film in the unit, select the new paper type. Change this
setting whenever you change the type of paper or film. For more information, see
"Recommended paper-type settings for copying."
1 On the front panel, press Menu.
2 Press 1, and then press 2.
3 Press
4 Press ENTER to choose the displayed paper type.
These settings are set using the Paper Type option.
For
Copier paper or letterhead
HP Bright White Inkjet Paper
HP Premium Inkjet Transparency Film
HP Premium Inkjet Rapid-Dry Transparency Film
HP Premium Photo Paper
HP Premium Inkjet Paper
HP Premium Inkjet Heavyweight Paper
HP Iron-On T-Shirt Transfers
HP Premium Inkjet Brochure Paper (glossy)
HP Premium Inkjet Brochure Paper (matte)
The unit lets you change the paper size for copying and faxing. For faxing, your change
remains in effect until you change it again. To switch to a different paper size, do the
following:
1 On the front panel, press Menu.
2 Choose one of the following:
• To change the size for a copy job, press 1, and then press 3.
• To change the size for a fax job, press 5, and then press 4.
3 Press
10
until the appropriate type appears.
until the desired paper size appears, and then press ENTER to select it.
Chapter 3—Load paper or transparency film, or load originals
Use
Plain Paper
Plain Paper
Transparency
RapidDry Trans
Photo Paper
Premium Inkjet
Premium Inkjet
Iron-On
Brochure Glossy
Brochure Matte