HP 1200 series Basic Manual page 20

HP Fax 1200 Series
All copy settings selected on the front panel are reset two minutes after the unit
completes the copy job unless you save the settings as the default settings. For more
information, see "Change settings for all future copy jobs."
1 Load the input tray with the appropriate paper.
For more information, see "Load paper or transparency film, or load originals."
2 If you are using anything other than plain paper, do the following:
• Press Menu.
• Press 1, and then press 2.
• Press
select it.
For more information, see "Recommended paper-type settings for copying."
3 Load your original.
For more information, see "Load originals."
4 If you want to make more than one copy (the default), press Number of Copies,
and then use the keypad to enter the number of copies.
For more information, see "Set the number of copies."
5 Change any other applicable settings.
6 Press START COPY.
Your unit provides three options that affect copy speed and quality.
• Best produces the highest quality for all paper and eliminates the banding (striping)
effect that sometimes occurs in solid areas. Best copies more slowly than the other
quality settings.
• Normal delivers high-quality output and is the recommended setting for most of
your copying. Normal is the recommended setting for all paper types and is faster
than Best.
• Fast copies faster than the Normal setting. The text is of comparable quality to the
Normal setting, but the graphics may be of lower quality. Using Fast also cuts down
on the frequency of replacing your print cartridges because it uses less ink.
1 Press Menu.
2 Press 1, and then press 8.
3 Press ENTER to select Copy Quality.
4 Press
5 Press ENTER to use the option you selected.
14
until the appropriate paper type appears, and then press ENTER to
to scroll through the available options.
Chapter 4—Use the copy features