HP 1200 series Basic Manual page 22

HP Fax 1200 Series
Use Text Enhancements (TE) to sharpen the edges of black text. It is turned on by
default. (It is automatically turned off if you select Photo Mode.) Turn TE off only if:
• Stray dots of color surround some text on your copies.
• Large, black typefaces look splotchy (not smooth).
• Thin, colored objects or lines contain black sections.
• Horizontal grainy or white bands appear in light- to medium-gray areas.
To turn Text Enhancements off
1 Press Menu.
2 Press 1, and then press 4.
3 Press
4 With Text Enhance Off visible, press ENTER to select it.
A filled circle indicates the selected state.
Use any of the following to set the number of copies.
• Press Number of Copies, and then press the plus (+) or minus (–) button to
increase or decrease the number of copies to make. If you press and hold the
plus (+) or minus (–) button, the number changes first in increments of one, and
then in increments of five.
• Press Number of Copies repeatedly to increase the number of copies to make.
• Press Number of Copies, and then use the keypad to enter the desired number.
You can save the copy settings you use most often by setting them as the default settings.
1 Using the buttons on the front panel, change the settings that you want to save.
Press Menu.
2
3 Press 1, and then press 6.
4 Press ENTER to save your settings.
Your settings are saved. Current settings are indicated by a filled circle. Default
settings have no special indicator.
16
to switch between Off and On.
Chapter 4—Use the copy features