Table of Contents
Advertisement
Introduction (continued)
<Network Settings>
G Select the network device (network adaptor) to be used
• Wired connection using a LAN cable
• Wireless connection using a wireless LAN card (inserted in PC card slot)
• Wireless connection using a built-in wireless LAN adaptor
G Protocol to be used: TCP/IP
G Configure the TCP/IP attributes (IP address, Subnet Mask)
Manual setting/Automatic setting (for networks utilizing a DHCP server function equipped
devices)
If you will be manually setting the TCP/IP attributes, turn the DHCP setting OFF and then
configure the settings.
G For more details of the settings, see the table below.
PC and WNM80 Module Connection
P2P (Peer to Peer)
Local access point
Existing network (via access
point)
Setting
PC/Access point
IP Address
192.168.100.N
*N should be unique (1 to 254)
Subnet Mask
255.255.255.0 recommended
DHCP
OFF (not used)
Communication Mode
802.11 AD-HOC
Channel
1 to 11
Speed
AUTO (or a fixed speed)
WEP (encryption)
OFF (not used)
Encryption Key
Unnecessary
SSID
"default"
Host Name
Can be set for each PC
IP Address
192.168.100.N
*N should be unique (1 to 254;
including access points)
Subnet Mask
255.255.255.0 recommended
DHCP
OFF (not used)
Communication Mode
Infrastructure
Channel
1 to 11
Speed
AUTO (or a fixed speed)
WEP (encryption)
OFF (not used)
Encryption Key
Unnecessary
SSID
"default"
Host Name
Can be set for each PC
Consult with your network
administrator.
Configuration (Recommend Setting Example)
WNM80 Module
192.168.100.10
*doesn't need to be 10
255.255.255.0 (same as PC)
Same as PC
Same as PC
Same as PC
Same as PC
Same as PC
Same as PC
Same as PC
Can set the projector name
192.168.100.10
*doesn't need to be 10
255.255.255.0 (same as PC)
Same as PC
Same as PC
Same as PC
Same as PC
Same as PC
Same as PC
Same as PC
Can set the projector name
Consult with your network
administrator.
Advertisement
Table of Contents
