Table of Contents
Advertisement
Additional Items (continued)
Problem
Can't
communicate
The images
from the
recently
executed Live
Mode are gone
The images
you marked
don't appear
Can't communicate
Can't communicate
Likely Cause
The module isn't in
Playback Mode
You didn't mark the images
during your Live Mode
presentation
The 8MB limit was
exceeded (image size
depends on content)
The wireless LAN card isn't
inserted into the module or
the memory card is still
inserted
The PC and/or projector's
network settings are not
configured correctly
You didn't use a cross
cable to directly connect
the PC to the module
The wireless LAN card is
inserted into the module
Things to Check
Press the WIRELESS button on
the projector's remote to make
sure that it is in the correct mode
Press Print Screen (on your
PC keyboard) during Live
Mode for each image you
want to playback in
Playback Mode
The projector's RAM disk is
limited to 8MB. Use
FileViewer to check the
image volume currently
stored in the projector
Insert the wireless LAN card
that came with your WNM80
module into the module
Check both the PC and
projector's network settings
Straight cables are normally
used to connect computers
to the network, but when
you connect your PC
directly to the module, you
need to use a cross cable
Remove the wireless LAN
card from the WNM80
module's PCMCIA slot (you
can't use both wireless and
wired LAN connections at
the same time)
Reference
Page
Number
19
3,19
23
11
12, 29,
32
3
4
Advertisement
Table of Contents
