Wireless Presentations; (Live Mode) - Hitachi WNM80 User Manual

Operations
Wireless Presentations (Live Mode)
You can project the content of your PC display as is via the projector to which the WNM80
module is mounted using wireless communication. First of all, let's take a look at the basic
wireless presentation operation. (Refer to
A PC with built-in 802.11b wireless LAN
functionality or with an 802.11b wireless
LAN card inserted into its PC card slot.
LiveViewer.exe program is installed.
<Startup>
• Turn on the power of the projector (that the WNM80 module is mounted
to) and then press the STANDBY button. (After a moment, the lamp
comes on.)
• Press the WIRELESS button on the projector's remote control.
• The screen will appear as on the right. Use the remote controls
navigation buttons to move the cursor over the Live Mode option and
then press the ENTER button.
• Startup the PC.
• Open LiveViewer
(Start -> All Programs -> WNM Utilities -> WNM LiveViewer).
(1) Click this
NOTE
If you should experience a momentary interruption in communication, press the Find button
again to search for a projector again.
for additional operations.)
The WNM80 with the accompanying
802.11b wireless LAN card inserted into
its PC card slot
(2) Find the projector you wish to
use for your presentation.
A list of projectors appears.
Select the one you wish to use
and the press OK.
The names of the protectors
are listed as configured on the
projectors themselves. If a
name has not been set for a
given projector, its IP address
will be displayed instead.