Hitachi WNM80 User Manual page 23

<Applied Operation: Multiple Screens>
This section explains how to combine images from multiple PCs onto a single projector at the
same time. You can use this function for two, three and even four PCs at a time.
NOTE
However, that images displayed using this feature will be projected at quarter of the normal size.
Two PCs at a time
• Open the WNM LiveViewer on each PC.
• Press the PLAY button and close down the LiveViewer dialog.
• Right click on the LiveViewer icon residing in the system tray and then click on Multi PCs.
• Select the number of PCs you wish to use at the same time.
You can adjust this setting from any of the participating PCs. The most recent setting made is
the one that is used.
What if the number of PCs set is higher than the actual number of PCs being used?
•
The images from the participating PCs are projected in the order of top left, top right, bottom left and bottom right.
So, until you have connected the maximum number of PCs (four), you can continue to add additional PCs.
What if the number of PCs set is lower than the actual number of PCs being used?
•
For example, if you make the selection for four PCs and the actual number of participating PCs is four, but then you
change the setting to two PCs, only the images of the two most recently connected PCs will remain, with the image
from the first one of the remaining two PCs being projected on the left and the other one being projected on the right.
NOTE
In the above example, the images of the first two PCs to be connected will disappear from the screen. However,
no matter what the order of display, if only one PC is selected, then its image will be displayed at full screen size.
Can I mark multiple screen images for playback?
Yes. Simply press the Print Screen key when the multiple screen is displayed. The complete
multiple screen image will be saved in the projector's internal memory.
Three PCs at a time
1st PC 2nd PC
connected connected
3rd PC 4th PC
connected connected
Four PCs at a time